A complete line of cutters is available for the D-3 (or MMC) power checkering tool. A limited supply of cutters is also available for the discontinued Dem-Bart power tool.
D-3 cutters are available in .040", .050", .062" or .070" widths. All cutters are 30 teeth except for the .062" 90 degree 26 teeth, which is used for production checkering, and the 60 degree .062" and .070" cutters.
All cutters are capable of checkering gunstocks and metal.
Both Right and
Left hand cutters are available.
20
cutter types are available.
Shown is 90 degree .062" X .5" standard cutter.
90 degree .062" X .5" ($99)
90 degree .050" X .5" ($105)
90 degree .040" X .5" ($105)
75 degree .062" X .5" ($105)
75 degree .050" X .5" ($109)
75 degree .040" X .5" ($114)
60 degree .062" X .5" ($99)
60 degree .050" X .5" ($105)
60 degree .040" X .5" ($105)
Shown: Radius Cutter
This is the proper tool for
cutting the "Mullered" or "English" border.
Cutter is
available in .040", .050" and .060" widths.
Radius .062" X .5" ($99)
Shown: Square Cutter
This is the proper tool for
cutting "Flat Top" checkering.
Cutter is
available in .040", .050" and .060" widths.
Square .062" X .5" ($95)
Square .050" X .5" ($99)
Square .040" X .5" ($105)
Back to J&R Home
You can e-mail us at jandrengineering@hotmail.com
This page last updated on September 1, 2007